top of page

Bandsaw Power Feeder - Heavy Duty

AF19
$2,795.00
In stock
1
Product Details

[tab name='Overview']Bandsaw Power Feeder - Co-Matic Heavy Duty AF19

Heavy-Duty Power Feeder Designed for use on Bandsaws

The Co-Matic AF19 Bandsaw Power Feeder is spring loaded and includes a roller fence for smooth and even feeding through a bandsaw and is capable of heavy-duty workloads. The spring tension is adjustable.

*Ships via LTL Freight - Contact us if you require lift gate service and/or are located at a residential address or outside the lower 48 states.

Optional: 180 x 40mm RU18 Polyurethane Roller Assembly - Recommended if the face of the workpiece where the rollers make contact is finished and cannot have any marring.

[tab name='Specs']

  • 1/2 HP motor
  • 10 Speeds ranging from 4 - 60 fpm
  • 2 Serrated Rollers: 6-7/8" X 1-9/16"
  • Manual Adjustment (Spring-loaded) for Various Thicknesses
  • Scaled Roller Fence included
  • 2 Year Warranty
Height (w/Handle) 12-1/4"
Width 13"
Length Fully Extended 43"
Net Weight 176 lbs
Gross Weight 254 lbs
Max. Height of Rollers 7-7/8"
Swing Rotation 30°
Max. Roller-Blade Clearance 8-1/4"
Fence Size 15-3/4"L x 7-7/8"
Max. Fence-Blade Clearance 8-1/4"

Your bandsaw table needs the following amount of space to mount the feeder on the front right (outfeed) corner of the table without adding an extension bracket:

1. 9.3" is required from the tip of the blade to the end of the table on the outfeed side.

2. 11.25" is required from the tip of the blade to the end of the table (opposite the fence).

This feeder can fit on smaller bandsaw tables, but may require an extension off the side of your bandsaw table where the feeder is mounted.

[tab name='Videos']

[tab name='Reviews']

Save this product for later
bottom of page